Skip to main content

KAL740

Kilsen Addressable Supervised Relay Output Module - 1 Output
  • EN54:18 approved and CPD certified
  • Surface mount
  • Externally powered
  • Local alarm and communications indication
  • Fully supervised 24 VDC Output
View all

At a glance

General

The KAL700 series modules include a complete range of interfaces developed for I/O control on Kisen addressable fire systems, housed in easy to install, IP55 housings. These modules allow the fire system to perform additional building management functions during fire situations. 125 I/O addresses are available on every fire panel loop in addition to 125 fire detector addresses.

KAL700 Supervised Output Modules

The KAL740 allows for the control and supervision of a 24 VDC powered output on the fire system loop. It requires an external 24 VDC power source.

Installation

The KAL700 Series is designed for surface mount installation. Addressing on the modules is done via easy to use DIP switches.

Applications

The KAL740 unit may be used to control sounders or switch any output considered crucial enough to have the cable integrity between the control unit and the activating unit continuously monitored. Easy configuration options make the unit fully programmable from the control panel and linked (or not) to the main sounder control functions on the user interface of the panel should the unit be used for sounder control.

Details

  • EN54:18 approved and CPD certified
  • Surface mount
  • Externally powered
  • Local alarm and communications indication
  • Fully supervised 24 VDC Output
  • Part of a family of I/O modules consisting of: -Conventional zone monitors -Digital input modules -Extinguishing control modules -Loop Isolators -Manual call points -Relay and supervised output units -Fire door controllers

Technical specifications

General
Status indication
LED
Compatibility
Kilsen KL7A systems
Electrical
Power supply type
24 VDC
Operating voltage
22 to 38 VDC
Current consumption
110 µA @ 24 VDC from the loop (Quiescent)
135 µA @ 35 VDC from the loop (Quiescent)
< 3.6 mA from the loop (Active)
6 mA external (Quiescent)
9 mA external (Active)
Output
Output quantity
1
Output type and rating
Supervised, 0.5 A @ 42 VAC / 1A @ 30 VDC
Termination resistor
15 kΩ
Physical
Physical dimensions
150 x 110 x 70 mm
Net weight
370 g
Colour
Grey
Mounting type
Surface mount
Cable entries
10
Environmental
Vandal proof
No
Operating temperature
-10 to +50°C
Storage temperature
-10 to +70°C
Relative humidity
10 to 95% noncondensing
Environment
Indoor
IP rating
IP55
Regulatory
Compliancy
CE
REACH
RoHS 2
WEEE
Certification
CPR
Standards
EN54-18

Compatible products

Category Reference Description
Interface unit KAL710 Kilsen Addressable Zone Monitoring Units - 1 Zone
Interface unit KAL714C Kilsen Addressable Zone Monitoring Units - 4 Zones
Interface unit KAL730 Kilsen Addressable Relay Output Module - 1 Output
Interface unit KAL734C Kilsen Addressable Relay Output Module - 4 Outputs
Interface unit KAL760 Kilsen Addressable Input Module - 1 Input
Interface unit KAL775 Loop Isolation Module